Water required = 0.5 × 1.39 = 0.695 kg cement with 10% replacement of Marble dust powder is less as compared to cement with 0% replacement of B) FOR CYLINDER: marble dust powder. Marble dust powder is a waste product and is available free of cost.
the cement is replaced with tile powder up to 30% and further replacement of cement with tile powder decreases the strength gradually. 2. Tile powder concrete has increased durability performance. 3. It is the possible alternative solution of safe disposal of tile waste. By adopting such methods
Dec 14, 2015· behaviour of concrete by partial replacement of cement and sand with marble powder and quarry dust
Cement was replaced by marble dust at 5%, 10%, 15% & 20% by weight of cement. For each percentage of replacement 6 cubes (3 for 7 days & 3 for 28 days) were prepared for testing.
exploitation marble powder as part replace of cement on the properties of concrete. The influence of exploitation marble powder on the behavior of ferroconcrete slabs is additionally investigated. The most variable taken into thought is that the proportion of marble powder as partial replacement of cement
Partial Replacement of Cement with Marble Dust and Fine Aggregate with Stone Dust Bokka NVDS Prakash M.Tech Student, ... 40% replacement of fine aggregate with stone dust is adaptable. Keywords: Stone Dust, Marble dust,compressive strength, split tensile tests.
replacement of cement with waste marble powder with M 25 grade" and concluded that up to 12% replacement of cement with waste marble there is an increase in all
The concrete mix proportion for M20 grade was designed in accordance with I. S. code. QUANTITY OF MARBLE POWDER; 5% of cement replaced by marble powder = 377. 38gm 10% of marble powder = 754. 7 gm 15% of marble powder = 1. 13 kg 20 %of marble powder = 1. 5094 kg Chapter – 6; Experimental procedure: Compressive strength of concrete was ...
What is the best replacement for cement in concrete in India? ... Marble Powder, Tile powder,Saw Dust,Coconut Shell Ash,Glass Powder etc. ... Isn't there any material which can be used as replacement of cement (ensuring the desired level of strength in both structural and non-structural concrete) 1.2k Views · View 1 Upvoter · Answer ...
replacement, mix was prepared with cement and sand blended with marble dust with replacement from 10%, 20%, 25% and 30%.The investigation indicates that replacement of cement by
A preliminary concrete mix design for SCC with marble powders. Const. Build. Mat., 23(3): 1201-1210. 10. Ali Ergun (2011), "Effects of the usage of diatomite and waste marble powder as partial replacement of cement on the mechanical properties of concrete", Construction and Building Materials, 25(2), pp …
This is to certify that this report entitled "partial replacement of cement with marble powder" is a bonafide record of the mini project presented by rahul, jamsheed, shanil, geo, and jagdeesh, under our guidance towards the partial fulfilment of the requirements for the award of bachelor of technology degree in civil engineering, by the ...
M30 Along With Partial Replacement Of Natural Sand By Varying Percentage Of Crusher Dust And Waste Marble Dust . Prarthita Basu . M.Tech Scholar, Kautilya Institute of Technology & Engineering . Abstract: The present paper deals with the effect on strength characteristics of cement concrete by using Fly ash (FA), Marble dust (MD) & Stone dust (SD).
From the above study, it is concluded that the marble dust can be used as a replacement material for cement ; and 10% replacement of marble dust gives an excellent result in strength aspect and quality aspect and it is better than the control concrete.
Partial replacement of marble powder in cement accordingly in the range of 20%, 30%, 40%, by weight for M20 grade of concrete. With this experimental research work the problem of waste production management of this agro waste are will be solved.
marble dust in the cement concrete gives the best results. And also increase in curing days will increase the strength of marble dust concrete when compared from 14 days to 28 days. Rakesh Gupta studied on "Partial replacement of cement with marble powder" and
4) Quarry dust was a better partial replacement of cement in concrete than the marble powder because it shows good strength and other properties of concrete. 5) By partial replacement of cement with quarry dust and marble powder, the environmental pollution caused by cement production can be reduced to a certain level.
The experimental results for M25 concrete shows that 10% replacement of cement with marble dust in concrete can be used, with an increase in the compressive strength as 23.13%, 23.85%, 24.61%, 18.09% and 15.2% for 28 days, 56 days, 118 days, 208 days and 393 days respectively, whereas in presence of sulphate solution, compressive strength ...
concrete with the concrete replaced with marble powder as partial replacement of cement and natural sand by stone dust. The work is carried out with M 20 and M 30 grade concrete with w/c ratio of 0.55 and 0.45 respectively as a control specimen and the cement is replaced by marble
Comprehensive effect of partial replacement of cement with dried marble slurry and simultaneous variance in w/c ratio on characteristic properties of cement paste, mortar, mechanical & durability aspects of remains a matter of research. The present study is an attempt in the aforesaid direction. 2. Research significance
marble sludge dust in concrete production as partial replacement of cement. In INDIA, the marble processing is one of the most thriving industry the effects if varying marble dust contents on the physical and mechanical properties of fresh and hardened concrete have been investigated. Test
The project describes the feasibility of using marble dust with partial replacement of cement. An experimental investigation is carried out to compare the strength characteristic of conventional concrete with the concrete replaced with marble powder as partial replacement of cement.
The replacement is done by 5%, 10%, 15%, 20%, 25% of cement by marble powder and 5%, 10%, 15%, 20%, 25% of fine aggregate by granite powder to evaluate the effect of presence of these replacement materials on the strength of specimens.
Partial Replacement of Cement to Concrete by Marble Dust Powder and threatening both agriculture and public health. Therefore, utilization of the marble dust in various industrial sectors especially the construction, agriculture, glass and paper industries would help to protect the environment.
The use of waste marble powder (dust) was proposed in partial replacement of cement, for the production of Mortar and Concrete Mix. In particular, tests were conducted on the mortars and concrete mix cured for different times in order to determine their workability, flexural as …
Keywords: Concrete, Compressive strength, Ground-granulated blast – furnace slag, flexural strength, Marble slurry. I. INTRODUCTION In this project we have investigates the results of properties on concrete by partial replacement of cement OPC (43-grade) up to 20% with Ground-granulated blast furnace slag and fine aggregate replaced up to
marble dust powder (10% by weight of cement) into the concrete improved its compressive strength by 8.54 % and 12.84 % respectively at 7 & 28 days. The split tensile strength of concrete increases up to 10% replacement of cement by marble waste powder. The split tensile
An attempt is made with marble dust as a partial replacement of cement in the concrete. The main aim of this study is to present an overview of research work carried out by various researchers in the field of marble dust and replacement of cement.
effect of partial replacement of cement by marble dust on compressive strength and carbonation of ppc concrete Conference Paper (PDF Available) · November 2015 with 2,896 Reads DOI: 10.13140/RG.2 ...
PARTIAL REPLACEMENT OF FINE AGGREGATE BY MARBLE SLURRY CEMENT WORKS Er. R P Singh 1, Er. Arvind Singh Gaur 2 1Ph.D. Scholar, SGV University, Jaipur ... and 25% replacement of marble slurry gives an excellent result in strength aspect and quality aspect and it is better